Straight Razor Gear

Best Straight Razors

How to choose the best straight razor for home or barbershop use: shavette vs traditional, steel, grind, width, point, trusted makers, and what else you need.

On this page
  1. Quick answer: it depends on who is shaving
  2. Traditional straight razor or shavette?
  3. What to look for in a straight razor
  4. Well-regarded straight razor makers
  5. Best straight razors by situation
  6. What else you need besides the razor
  7. FAQ
  8. Where to go next

Quick answer: it depends on who is shaving

There isn’t one best straight razor for everyone. The right choice depends mostly on whether you are shaving other people or yourself.

  • For barbers shaving clients, a replaceable-blade straight razor (often called a shavette) is the usual choice. A fresh blade for each client is simpler and more hygienic than keeping one permanent edge clean and sharp.
  • For shaving yourself at home, many experienced shavers prefer a traditional straight razor with a fixed blade. A good first choice is a 5/8 or 6/8 inch blade with a full or near-full hollow grind and a round point, from a reputable maker, sold shave ready.

The rest of this guide explains why, and how to pick a razor you’ll actually enjoy using.

Traditional straight razor or shavette?

A traditional straight razor has a permanent steel blade that you keep sharp with a strop and occasional honing. A shavette holds a disposable blade in a clamp, so it never needs sharpening. We compare the two in detail in shavette vs straight razor.

Why barbers mostly use shavettes

The answer to “what is the best razor for barbers?” is usually a shavette. Many shops and local health rules expect a new blade for each client, which is easy with a disposable blade and hard with a traditional razor. Shavettes are also inexpensive to buy, need no honing, and are quick to reload between clients.

Models from Feather (the Artist Club line), Dovo and Parker are commonly mentioned by barbers. Feather Artist Club razors use Feather’s own blades, while many other shavettes take standard half double-edge blades or pre-cut single-edge barber blades.

Why home shavers often choose a traditional razor

When you shave only yourself, the hygiene argument largely disappears, and other factors take over:

  • Feel. Traditional blades are thicker and heavier, and many shavers find them smoother and more predictable than a thin disposable blade.
  • Longevity. A well-kept traditional razor can last for decades, and many vintage razors are still shaving well today.
  • No ongoing blade cost. You pay up front for the razor and a strop, then occasional honing.

The trade-off is maintenance. You’ll need to strop before most shaves and hone (or pay for honing) from time to time.

What to look for in a straight razor

Steel: carbon vs stainless

Most traditional razors are made from carbon steel or stainless steel.

  • Carbon steel is the traditional choice. It is generally regarded as easier to hone and many shavers find it takes a very keen edge. It can rust if left wet, so it needs drying and an occasional light coat of oil.
  • Stainless steel resists rust better, which suits humid bathrooms and forgetful owners. Some stainless razors are harder to hone, which matters more if you plan to sharpen at home.

For a first razor, carbon steel is a sound choice as long as you’re willing to dry it after every shave. Our straight razor care guide covers the routine.

Grind

The grind describes the blade’s cross-section. A full hollow blade is thin and slightly flexible, gives clear feedback on the skin, and is the most common modern grind. Wedge and near-wedge blades are heavier and stiffer. Most new shavers do well with a full or three-quarter hollow grind. See straight razor grinds explained for the full spectrum.

Width

Width is measured from spine to edge in eighths of an inch. 5/8 is the standard, 6/8 is a little heavier and holds more lather, and smaller or larger sizes suit particular preferences. Our guide to straight razor widths compares 4/8 through 8/8.

Point shape

  • Round point: the most forgiving, and the usual recommendation for beginners.
  • French or Dutch (semi-round) points: a compromise between safety and precision.
  • Square or spike point: precise for edging around sideburns and the lip line, but easier to nick yourself with.

Scales and balance

The scales (handle) are mostly a matter of taste. Plastic and acrylic scales are inexpensive and tolerate water well. Wood and horn look and feel premium but dislike being soaked. Whatever the material, the scales should hold the blade centred when closed so the edge doesn’t touch them, and the razor should feel reasonably balanced around the pivot.

“Shave ready” matters most

This is the single biggest factor for a beginner. A razor can be sharp enough to cut paper and still be too coarse to shave comfortably. If you are new to straight razors, buy from a seller who honestly states the razor is shave ready, or budget for a professional honing before your first shave. A beginner can’t tell whether bad results come from technique or the edge, and a poor edge makes learning much harder. Our guide on how to tell when a straight razor needs honing explains the warning signs.

Well-regarded straight razor makers

These makers are frequently recommended by experienced shavers and retailers. Quality can vary between models and batches, so buying from a specialist retailer that checks or hones razors before sale adds a layer of reassurance.

  • Dovo (Solingen, Germany): one of the most widely available makers, with a broad range from entry-level models to collector pieces.
  • Böker (Solingen, Germany): a long-established cutlery maker with a range of razors.
  • Ralf Aust (Solingen, Germany): a smaller maker with a strong reputation for consistent edges.
  • Giesen & Forsthoff (Solingen, Germany): often offers more affordable traditional razors.
  • Thiers-Issard (Thiers, France): a well-known French maker producing both everyday and high-end razors.

Vintage razors from historic makers in Sheffield, Solingen and elsewhere can also be excellent, provided they’ve been properly restored and honed. If you’ve inherited one, see how to restore a rusty vintage straight razor and are old cut-throat razors valuable?.

Best straight razors by situation

Best first straight razor

A 5/8 or 6/8 full hollow, round-point, carbon steel razor from one of the makers above, sold shave ready. Plain plastic or simple wooden scales keep the price down and are less worrying if the razor gets wet. Entry-level models from Dovo and Giesen & Forsthoff are commonly suggested as first razors.

Best option for barbers

A sturdy metal shavette that holds the blade firmly, such as models from Feather, Dovo or Parker. Choose one that fits a blade format you can buy easily and cheaply. Our guide to the best cut throat razor blades covers blade formats and brands.

Best budget route

There are two sensible options. One is a shavette, which costs little up front. The other is a vintage razor bought from a restorer who sells it honed and ready to shave. Very cheap new traditional razors of unknown origin are a gamble: some shave well after a proper honing, but many arrive with poor edges.

Best for low maintenance

A stainless steel traditional razor if you want a permanent blade but worry about rust, or a shavette if you don’t want to strop or hone at all.

Best for heavy beards

Some shavers with dense, coarse beards prefer a wider (6/8 or 7/8) blade or a heavier grind, because the extra weight helps the blade move through stubble. This is a personal preference rather than a rule, and plenty of people with heavy beards shave happily with a 5/8 full hollow.

What else you need besides the razor

A traditional straight razor needs a few companions:

If you’d rather buy everything at once, our guide to the best straight razor kits explains how to tell a good bundle from a padded one.

FAQ

What blades do I need for a cut-throat razor?

A traditional cut-throat razor doesn’t take separate blades; the blade is part of the razor and is resharpened. A shavette needs replaceable blades, usually half double-edge blades or pre-cut single-edge barber blades, depending on the model.

Is shaving with a cut-throat razor better?

It can give a very close, controlled shave, and many people enjoy the ritual. It is also slower and has a real learning curve. Whether it’s better depends on what you value; we compare the options in straight razor vs disposable razor.

Are cut-throat razors worth it?

For people who enjoy the process and will keep up the maintenance, often yes. For people who want the quickest possible shave, usually not. We weigh it up in are cut-throat razors worth it?.

Where to go next

Keep exploring

Guides from other topics

All topics →