The grind of a straight razor describes the shape of the blade in cross-section: how much steel has been removed from the faces between the spine and the edge. It affects how the razor feels, how heavy it is, how it sounds and how it hones.
What “grind” means
Imagine slicing through a razor blade from spine to edge and looking at the cut face.
- On a wedge, the faces run in nearly straight lines from a thick spine to the edge, like a narrow triangle.
- On a hollow ground razor, the faces curve inward (concave), because the blade was ground on a round wheel. The more hollow the grind, the thinner the blade behind the edge.
Every razor has a thick spine and a fine edge; the grind is about what happens in between.
The grind spectrum
| Grind | Cross-section | Weight and stiffness | Feel |
|---|---|---|---|
| Full wedge | Straight faces, thick throughout | Heaviest, stiffest | Solid, quiet, little flex |
| Near wedge / quarter hollow | Slight concave | Heavy, stiff | Similar to wedge |
| Half hollow | Moderate concave | Medium | Balanced feel |
| Three-quarter hollow | Deeper concave | Lighter | More feedback |
| Full hollow | Deep concave, thin behind the edge | Light, flexible | Clear feedback, often audible |
| Extra hollow | Very thin behind the edge | Lightest, most flexible | Very lively; “singing” |
Different makers label grinds slightly differently, so treat these categories as approximate.
Full wedge and near wedge
The oldest style. Many antique razors were wedges. They’re heavy and stiff, with little flex, and some shavers feel the weight helps the blade move through coarse stubble. They’re quieter on the face and give less audible feedback.
Quarter and half hollow
A middle ground. Some steel is removed for a lighter feel and a bit more feedback, but the blade stays fairly stiff. Half hollow razors are sometimes recommended for heavy beards or for people who find full hollows too lively.
Three-quarter and full hollow
The most common modern grinds. The blade is thin behind the edge, which makes it light and slightly flexible. Many shavers find this gives clear feedback: you can feel and hear the hair being cut, which helps you judge angle and pressure. Full hollow is the usual recommendation for a first razor.
Extra hollow (“singing” razors)
Extremely thin behind the edge. These razors often make a distinctive sound during the shave and are sometimes called “singing” razors. They’re very responsive but also more delicate; the thin steel near the edge can be easier to damage.
Does grind change sharpness?
Not directly. Sharpness comes from the edge, which is created by honing a small bevel at the very tip. That bevel’s angle is set mainly by the spine thickness and blade width, not by the grind. A wedge and a full hollow can both be honed to a shave-ready edge.
What grind does change is the steel just behind the edge. A hollow grind is thinner there, which can make it feel keener and more responsive; a wedge has more steel behind the edge, which some describe as smoother or more solid.
How grind affects the shave
- Feedback: hollow grinds transmit more sound and vibration, which many beginners find helpful.
- Weight: wedges are heavier; some people like the momentum, others find it tiring or less precise.
- Flex: hollow grinds flex slightly over contours; wedges don’t.
- Beard type: there’s no strict rule, but some shavers with very coarse beards prefer stiffer grinds, while others shave coarse beards perfectly well with a full hollow.
How grind affects honing
On a hollow ground razor, only the spine and a narrow strip at the edge touch the stone, so honing is quick and the contact is predictable.
A wedge has more steel near the edge and often a less uniform spine. It may contact the stone over a wider area, or unevenly, and can need rolling X strokes or tape on the spine to hone well. Many honers consider wedges more challenging, especially for beginners.
Our guide to honing a straight razor on whetstones covers both cases.
Which grind should a beginner choose?
A full hollow or three-quarter hollow grind is the usual recommendation. It’s light, widely available, easy to hone, and gives clear feedback while you learn angle and pressure. If you know you like heavier tools, a half hollow is a reasonable alternative.
Wedges are best left until you’re comfortable shaving and honing, unless you’re buying one already professionally honed and you specifically want the feel.
Grind vs other specs
Grind is only one part of the picture. Width, point shape, steel and above all the quality of the edge all shape how a razor shaves. See our guides to straight razor widths and the best straight razors for the rest.