Safety Razors

Slant Safety Razors: How the Twisted Head Cuts and Who Should Use One

How a slant safety razor's twisted head slices through stubble, whether slants are aggressive, who should use one, notable models like the Merkur 37C, and technique tips.

On this page
  1. What is a slant safety razor?
  2. How the twisted head cuts
  3. Are slants aggressive?
  4. Who should use one
  5. Notable slant razors
  6. How to shave with a slant
  7. Loading and cleaning a slant
  8. Slant vs standard DE: quick comparison

A slant safety razor looks like a regular double edge razor that’s been twisted. The head is shaped so that the blade sits at an angle across the face of the razor rather than straight. That twist changes how the blade meets your stubble, and it’s why slants have a reputation for cutting through tough beards that other razors struggle with.

What is a slant safety razor?

A slant (or slant bar) razor holds a standard DE blade in a head where the cap and baseplate are shaped to bend and twist the blade. Look at one from above and you’ll see that each edge runs diagonally, with the two sides angled in opposite directions, like mirror images of each other.

It takes ordinary DE blades, so there’s nothing special to buy.

How the twisted head cuts

There are two effects:

  1. A slicing angle. Because the edge runs diagonally across the stroke, it meets each hair at an angle rather than square-on. Think of the difference between pressing a knife straight down on a tomato and drawing it across: the slicing motion cuts more easily. Slant makers often compare it to a guillotine blade.
  2. A more rigid blade. Bending and twisting a thin DE blade into the head stiffens it, so it flexes less as it cuts.

Together, these can make a slant feel efficient on coarse, dense or wiry beards, with less pulling than you might expect from a razor that cuts so readily.

Are slants aggressive?

It depends on the razor. “Slant” describes the head shape, not the aggressiveness, and slants range from fairly manageable to very aggressive.

  • Some, like the Merkur 37C, are efficient but considered manageable by experienced shavers, despite the nickname “the Sledgehammer”.
  • Others, such as some Yaqi slants, are described by enthusiasts as among the most aggressive razors around. See what are the most aggressive safety razors?

Some sellers describe slants as reducing irritation. That can be true for people whose irritation comes from tugging on coarse hair, but a slant isn’t inherently gentler than a mild standard razor. For sensitive skin, a mild conventional razor is usually the safer start. See best safety razors for sensitive skin.

Who should use one

A slant is worth considering if you:

  • Have a coarse, dense or wiry beard
  • Find standard razors tug even with a fresh blade
  • Shave every few days
  • Already have consistent technique

It’s usually not the best first razor. Many people find it easier to learn angle and pressure on a mild, straight-bar razor first, then try a slant once they know what a good shave feels like.

Notable slant razors

  • Merkur 37C: a short, heavy, two-piece slant from Solingen, Germany. Merkur lists it at around 78 grams, with a brass handle and a chrome-plated die-cast zinc head. Probably the best-known modern slant.
  • Merkur 39C: a longer-handled Merkur slant, often chosen by people who find the 37C’s handle too short.
  • RazoRock German 37 Slant: an affordable slant inspired by the Merkur 37C design.
  • Yaqi slants: several models, some of them very aggressive, at budget prices.
  • Rex Supply Co. Konsul: an adjustable slant in stainless steel, made in the US. Reviewers note a range biased slightly towards the aggressive side. See adjustable safety razors.
  • Vintage slants: slant razors have been made since at least the early twentieth century, and older European examples turn up on the second-hand market.

How to shave with a slant

The basics are the same as any DE razor, with a few differences:

  • Find the angle carefully. Start with the cap on the skin and lower the handle until it cuts. A slant may want a slightly different angle from your usual razor. See finding the right blade angle.
  • Shave straight, not sideways. The slicing angle is built into the head; you don’t need to add a sideways motion. Use normal straight strokes.
  • Expect the two sides to feel different. Because the sides are mirror images, one may suit the left of your face better and the other the right. Some people use one side for each.
  • No pressure, especially with a heavy razor like the 37C.
  • Shorter strokes on curves; the twisted head can feel less predictable on the jawline at first.
  • Reduce gradually. See how many passes with a safety razor.

Loading and cleaning a slant

Loading takes a little more care, because the blade has to bend into the twisted head:

  • Lay the blade on the alignment posts and make sure it sits flat before closing.
  • Tighten steadily so the blade seats into the twist evenly.
  • Check that blade exposure looks the same along both edges.

Our guide to loading a blade into a two-piece or three-piece safety razor covers the basics. Rinse the head thoroughly after use; the twisted shape can trap lather.

Slant vs standard DE: quick comparison

Slant Standard DE
Blade Standard DE, bent and twisted Standard DE, held straight
Cut Slicing, diagonal Straight across
Best for Coarse, dense beards Most beards
Beginner-friendly Usually not the first choice Mild models are ideal
Aggressiveness Moderate to very aggressive Very mild to very aggressive

For more on how head design affects your shave, see our complete safety razor guide.

The complete guide to safety razors

Safety Razors: The Complete Guide to Double Edge Shaving
Read the guide

Keep exploring

Guides from other topics

All topics →