Vintage double edge razors are one of the nicest corners of wet shaving. A well-kept mid-century Gillette can shave as well as many modern razors, costs relatively little, and comes with a bit of history. Because Gillette and others made these razors in enormous numbers, there are still plenty around.
The catch is condition. A razor that’s been dropped, bent or badly stored can shave unevenly or not at all. This guide covers the models worth knowing, how to judge condition, and how to clean one up.
Why buy a vintage DE razor?
- Proven designs. Many vintage razors were made for decades and refined along the way.
- Value. Common models are often cheaper than new razors of comparable quality.
- Variety. Open combs, closed combs, adjustables and butterfly designs, all within one brand’s history.
- Longevity. A razor that’s already lasted fifty years will probably last a good while longer with care.
They all take standard modern DE blades, so you can use the same blades as in a new razor.
A short history of the vintage DE razor
King C. Gillette’s patent for a razor using thin, disposable double edge blades was filed in 1901 and granted in 1904. Early Gillettes were open comb razors with a three-piece design. Over the following decades the company introduced one-piece twist-to-open razors, closed comb safety bars and, eventually, adjustable models.
Why safety razors lost popularity
From the 1970s, cartridge razors took over the market. Twin-blade and then three-blade cartridges on pivoting heads were heavily marketed, convenient and easy to use without much technique. The DE razor didn’t stop working, but it stopped being promoted, and over time fewer shops stocked razors or blades. The recent revival owes a lot to online communities and to people looking for a cheaper, lower-waste shave. Our complete guide to safety razors covers this in more detail.
Vintage razors worth knowing
Gillette Old Type and New (open comb)
The early Gillettes, from the first decades of the twentieth century, are open comb razors. The “New” improved the head design over the “Old Type”. These are older and more collectable, and condition varies widely. They shave relatively efficiently compared with later closed comb Gillettes. See our guide to open comb safety razors for how this design shaves.
Gillette Tech
A three-piece closed comb razor produced over a long period and in many variations, including aluminium versions. Techs are generally considered mild and forgiving, which makes them a popular, inexpensive first vintage razor. Some variants are lighter than modern razors.
Gillette Superspeed
A one-piece twist-to-open razor made from the late 1940s onwards in many versions, including the well-known “tip” variants with coloured knobs. Superspeeds are generally mild to moderate and very common, which keeps prices accessible.
Gillette adjustables
Gillette made several adjustable butterfly razors, including the Fatboy, the Slim and the Toggle. A dial changes the blade gap, so one razor can be mild or quite efficient. These are popular and usually cost more than a Superspeed. See adjustable safety razors for how adjustment works.
Beyond Gillette
- Schick Injector razors use a single edge Injector blade, loaded from a dispenser.
- Gem and Ever-Ready razors use single edge GEM-style blades.
- European makers such as older Merkur and other German razors turn up too.
Single edge vintage razors need their own blade types; see single edge safety razors and what is the best single-edge razor blade?
Identifying age: date codes
Many mid-century American Gillettes have a date code stamped on the baseplate: a letter and a number. Collectors use published date-code tables to work out the year and quarter of manufacture. Razors made outside the US, and earlier or later razors, may not have them. Date codes are handy for identifying a model and its approximate age, but they don’t tell you anything about condition.
Condition checklist
Look at photos closely, or better still, inspect the razor in person.
- Head alignment. Look along the head from the side and from above. Doors or caps should sit level, not twisted.
- Doors (butterfly razors). They should open and close fully and evenly. A door that sits higher or lower than the other will give uneven blade exposure.
- Cracks. Check the cap and the centre bar, especially around hinges and posts.
- Threads. On three-piece razors, the threads should engage smoothly.
- Plating. Worn plating (brassing) is cosmetic on most razors, but flaking or bubbling plating can be rough on the skin.
- Knob action. The TTO knob should turn smoothly without wobble.
- Corrosion. Light surface marks usually clean up; heavy pitting near the blade area is a concern.
- Missing parts. Make sure three-piece razors come with all three parts.
When buying online, ask for clear photos of the head from several angles, ideally with a blade loaded so you can see exposure on both sides.
Where to buy
- Online auction and marketplace sites have the biggest selection; prices vary with condition and rarity.
- Antique shops, flea markets and estate sales can turn up bargains, sometimes in original cases.
- Wet shaving forums’ classified sections and specialist sellers often offer cleaned and checked razors, usually at a higher price but with less risk.
- Family. A surprising number of people find a grandparent’s Gillette in a drawer.
Cleaning and sanitising a second-hand razor
Any second-hand razor should be cleaned thoroughly before use.
- Remove any old blade and dispose of it safely.
- Soak in warm soapy water and scrub with a soft toothbrush to remove old soap scum.
- Use an ultrasonic cleaner if you have one, to reach hinges and gaps. Be cautious with flaking plating.
- Disinfect with a product intended for barber tools or with isopropyl alcohol, following the product’s directions.
- Rinse and dry thoroughly.
Avoid abrasive cleaners and metal polish on plated razors unless you’re prepared for the finish to change. For butterfly razors, our guide to taking apart and cleaning a butterfly safety razor explains why most vintage TTOs should be cleaned without disassembly.
Vintage vs modern: which to choose?
Choose vintage if you enjoy the history, want good value, and don’t mind inspecting and cleaning a razor before use.
Choose modern if you want a warranty, a guaranteed-straight head, or features such as stainless steel construction or swappable baseplates. If you’re comparing new razors, Merkur 34C vs Edwin Jagger DE89 looks at two long-standing choices.
Plenty of people own both: a modern razor for every day and a vintage Gillette or two for variety.