The three measurements that matter
Brush listings usually give a few numbers in millimetres. Three of them shape how the brush feels:
- Knot size: the diameter of the hair bundle where it enters the handle.
- Loft: the height of the hair from the top of the handle to the tips.
- Overall height: handle plus loft.
Two further features, density and shape, are rarely given as numbers but matter just as much.
Knot size
Knot size is measured across the base of the knot, where it’s glued into the handle. A bigger diameter means more hair, which generally means:
- more lather capacity,
- more water held,
- faster coverage of the face,
- a brush that feels “bigger” and less precise.
A smaller knot gives more control around the nose and lips, uses less product, and dries faster.
Typical size ranges
| Knot size | Common use |
|---|---|
| Under about 20mm | Travel brushes, small hands, precise face lathering |
| About 20–22mm | Compact everyday brushes |
| About 22–24mm | The most common middle ground. A safe first choice |
| About 24–26mm | Larger everyday brushes, quick coverage |
| About 26mm and up | Large brushes favoured by bowl latherers and some face latherers |
These bands are approximate. Feel also depends heavily on loft and density.
Loft
Loft is how far the hair extends above the handle. It changes backbone (how much the knot resists bending) and splay (how much it fans out under pressure).
- Shorter loft: more backbone, less splay, a firmer and more scrubby feel. Good for loading hard soaps and for face lathering.
- Longer loft: more flex, more splay, a softer and floppier feel. Pleasant for painting on lather but can feel limp with stiff soaps.
Brush makers can change loft by setting the same knot deeper or shallower in the handle. AP Shave Co’s illustrations show that setting a knot deeper also narrows its working circumference and makes it feel denser. The same source notes that badger “blooms”, expanding when wet, while synthetic doesn’t. So makers often set badger knots a few millimetres deeper than synthetic knots to get a similar feel.
A rough rule some shavers use is that a loft of around twice the knot diameter feels “balanced”. Treat it as a starting point, not a rule. Many well-loved brushes sit either side of it.
Density
Density is how tightly the hair is packed. Two brushes with the same knot size and loft can feel very different if one is packed with more hair. Higher density means:
- more backbone,
- more water and lather held,
- longer drying time,
- and sometimes a heavier, stiffer feel than people expect.
Some suppliers sell “SHD” (super high density) knots, especially in two-band badger. Because density rarely appears as a number, reviews and photos are the best guide.
Shape: bulb, fan and flat
- Bulb. Rounded and domed, narrowing towards the tip. Bulbs typically feel firmer and more precise. AP Shave Co notes they have more backbone than fans.
- Fan. Flatter-topped and wider at the tips. Fans spread out more and feel softer, and they can cover more area per stroke.
- Flat or squared-off. Less common. Often found on trimmed, cheaper brushes.
There’s no consensus on which shape is “better”. It’s personal preference.
How they work together
Think of a brush’s feel as the combined result of five factors: hair type, knot size, loft, density and shape. A few examples:
- A 24mm synthetic bulb with a moderate loft feels controlled and springy. It’s a versatile all-rounder.
- A 26mm high-density badger with a short loft feels firm and dense, and is very effective with hard soaps.
- A 22mm silvertip fan with a tall loft feels soft and floppy. It’s luxurious with creams, less so with stiff soaps.
- A large boar brush with a generous loft is the classic barbershop brush, with lots of capacity and a firm scrub once broken in.
Hair type sets the baseline. See badger vs synthetic shaving brushes and our boar bristle guide.
Choosing for your routine
- Face lathering with hard soaps: a medium knot (about 22–24mm) with a moderate or short loft, often in a bulb shape. Backbone helps.
- Bowl lathering: almost any size works. Larger knots (about 24mm and up) make big batches of lather quickly.
- Soft soaps and creams: softer, longer-lofted knots are pleasant and easy.
- Sensitive skin: soft tips matter more than size. Look at good synthetics or high-grade badger, and avoid fresh, unbroken-in boar.
- Travel: a compact synthetic, small enough to fit a tube or case.
- Small face or tight areas: a smaller knot gives better control around the mouth and nose.
Handle length and overall height
Handle length affects grip and reach. Longer handles suit bowl lathering. Shorter, stubbier handles give control on the face. Sharpologist suggests measuring from the palm of your hand to the pad of your thumb and treating that as a maximum handle length. It’s a simple way to avoid a handle that feels awkward.
Reading a brush listing
When comparing brushes, look for:
- Knot size in mm (diameter at the handle)
- Loft in mm
- Overall height in mm
- Hair type and grade
- Shape (bulb or fan)
- Handle material
If loft isn’t listed, ask the seller. It’s one of the most useful numbers for predicting feel. And if you’d rather choose every dimension yourself, you can make your own shaving brush by setting a knot at your preferred loft.
For complete recommendations, see our guide to the best shaving brushes.