Quick answer
After every shave, rinse the brush under lukewarm water until no lather remains, gently squeeze out the water, flick it a few times, and let it air dry, ideally in a stand.
Every so often, or whenever it feels stiff, smells, or doesn’t lather as well, deep clean it. Wash the knot with a little mild shampoo, rinse thoroughly and let it dry fully. If you have hard water, a short soak in diluted white vinegar can remove mineral and soap buildup.
Daily cleaning after every shave
- Rinse. Hold the brush under lukewarm running water and work the knot gently with your fingers until the water runs clear. Pay attention to the base of the knot, where soap tends to collect.
- Squeeze. Gently squeeze the knot from base to tips to push out water. Don’t wring, twist or pull the hairs.
- Flick. Give it a few light flicks of the wrist to throw off the remaining water.
- Shape. Smooth the tips back into shape with your fingers.
- Dry. Put it in a stand or leave it somewhere well ventilated to dry completely before the next shave.
That’s all most brushes need day to day.
Deep cleaning
How often you deep clean depends on your water, your soaps and how often you shave. Some people do it once or twice a year, others more often. Do it when you notice the brush feeling stiff, sticky or chalky, smelling stale, or lathering less well.
- Wet the knot with lukewarm water.
- Apply a small amount of mild shampoo to the knot. Gentle hair shampoo or baby shampoo work. For synthetic brushes, Kent suggests a drop of washing-up liquid.
- Work it in gently with your fingers or palm, as if making lather.
- Rinse thoroughly until no suds remain.
- Squeeze, flick and dry as above.
Some badger owners follow the shampoo with a small amount of hair conditioner, rinsed out well, to keep the hair soft. This is optional.
Removing hard-water and soap buildup
If you live in a hard-water area, minerals and soap scum can build up in the knot. The brush feels stiff and lathers poorly.
- Mix a diluted vinegar solution. Common suggestions range from about one part white vinegar to several parts water, up to Kent’s equal-parts mix for synthetic brushes. Weaker is gentler. Stronger works faster but should be used for shorter periods.
- Dip only the hair. Submerge just the knot, keeping the handle and glue joint out of the solution where you can.
- Soak briefly. A few minutes is often enough. Avoid long soaks, especially with natural hair or a strong mix.
- Rinse thoroughly, then wash with mild shampoo or dish soap to remove any vinegar smell.
- Rinse again and dry fully.
Cleaning by brush type
Synthetic
Synthetic brushes are the most forgiving. They don’t absorb water, they dry quickly, and they resist mildew. Kent recommends a rinse after every use and occasional deep cleaning with washing-up liquid and a vinegar soak.
Badger
Badger hair is natural, so be gentler. Use lukewarm rather than hot water, mild shampoo rather than harsh detergents, and dry it fully. Dense badger knots can stay damp inside for longer, so make sure they get good airflow.
Boar and horse
Boar and horse hair also benefit from lukewarm water and mild shampoo. New boar and horse brushes may smell a little at first. A few shampoo washes usually help. Avoid using horse hair brushes under hot shower water. New England Shaving Company warns this can cause bristle loss. See our guides to boar bristle brushes and horse hair brushes for more.
Getting rid of smells and mildew
- New-brush smell (common with natural hair): wash with mild shampoo two or three times and let it dry fully between washes. It usually fades with regular use.
- Stale or musty smell: usually means the brush isn’t drying fully. Deep clean it, then improve airflow. Don’t store it in a closed case or cupboard while damp.
- Visible mildew or a lasting musty odour that cleaning doesn’t fix: the brush may be past saving, especially if the knot is also loose. See why is my shaving brush shedding? for signs it’s time to replace it.
Mistakes to avoid
- Very hot water. It can damage natural hair and may weaken glue.
- Long soaks. Leaving a brush sitting in water lets water reach the base and handle.
- Twisting or wringing. This stresses hairs at the glue joint.
- Harsh chemicals. Bleach, strong cleaners and undiluted vinegar can damage hair and handles.
- Storing it damp in a closed container, toiletry bag or cupboard.
- Soaking wooden handles. Keep wood as dry as you can, and wipe it off after use.
Drying and storage
Many makers recommend drying a brush hanging bristles-down on a stand so water drains away from the base. Kent and the Boots men-ü instructions both recommend this. Other shavers dry brushes upright in a well-ventilated spot without problems. What matters most is that the brush dries completely, in open air before you put it away.
When travelling, let the brush dry as much as possible before packing it, and take it out of its tube or case at your destination. Many shaving brush sets include a drip stand, which makes good drying easy.
For more on choosing a brush that’s easy to look after, see our best shaving brushes guide.